2025 Horizontal Spin Trimmer

Trim virtually any type of resin with our heated blade technology

Watch The 2025 In Action

The model MTM 2025 and MTM 2225 spin trimmers are designed to trim “log” containers. These very high speed trimmers can handle over 300 containers per minute. Two pulley variable speed drive system with “V” guide timing belt allows for excellent control of the containers during the trimming process with no slippage on the drive pulleys. The stainless steel infeed chutes enable proper bottle spacing and positive feeding. Standard features include: Jam and incorrect trim detection system with light tower and audible alarm. Some of the common and popular options include:

Remote Control Box – Allows access to controls on either side of conveyor
Upright

2025 Features & Benefits

Download Product Sheet

Heated blade technology	Trim virtually any type of resin, including PETG, barrier resins, K resins, PVC, PP, PE; multi layer resins respond especially well.
New redesigned blade holder	Allows the blade to nest at the correct angle without a lengthy setup period. Reduced blade changeover time.
New redesigned blade holder adjustment	Designed to keep left hand and right hand blades in perfect alignment from the log centerline. Reduces changeove times and provides greater consistency.
Heavy duty 1/3 hp drive with DC variable speed controller	Long life and greater consistency in throughput. Allows various line speeds to be run on a single trimmer.
New two pulley drive system with “V” Guide timing belt	Allows for better control of containers during the trimming process with no slippage on the drive pulleys.
Simplified belt tensioning	Allows for quick changeovers increasing productivity. Reduces chance for operator error during procedure.
PLC controls with panel mounted user interface	Reduces setup time and functions as a fault message panel.
Jams and incorrect trim detection	Reduces down time and eliminates incorrectly trimmed containers.
Stainless steel infeed chute with bottle metering	Proper bottle spacing and positive feed.
Audible alarm and beacon lights for detection devices	Faster response time from plant staff. Higher production.

2025 Specifications

Dimensions

Width	40″
Length	72″
Height	89″
Weight	700 lbs
Vertical Height Range
44″ ±3″ Height from floor to blade

Utility Requirement

Electrical Supply
Voltage	120 VAC
Amperage	15 AMP
Compressed Air Supply
Line Size	1/4″ Pipe
Pressure	80-100 psi

Motor Ratings

Trimmer Drive Motor	1/3 hp
Heater Blade Temperature 450°F (Max)

Container Range

Containers per minute	300 (depending on size)
Min/Max neck size	1.5″ – 7″ 25-127 mm
Min/Max diameter	1″-4″ 38-178 mm
Min/Max height	3″-18″ 76-450 mm

Specifications are subject to change without notice. Guards are supplied and must be in place before operation. All sales are subject to our prevailing terms and conditions of sale. Other options available upon request.